User Documentation

20 2112220000/06/01.2021u-remote web server manual
7 Module settings
▶ Open the module component view.
Module component view
Here you can:
– Display general information about the module
– Access and change the module parameters
– Display information about certain channels
– Access the data sheet of the module (link Ordering data)
The module settings are only accessible when
force mode is not active.
Parameters can only be written when the eld
bus is not active.
7.1 Displaying and editing parameters
▶ Open the module component view.
▶ Open the Parameters you want to change.
The parameters are displayed.
For parameters that can be edited, you can enter the
changes in the entry elds or choose alternative settings
from a drop-down list.
Displaying and editing module parameters
▶ Enter the desired modifications.
Each change is marked with a green symbol until it will be
applied. All changes will only be saved after you click Ap-
ply changes. All changes will be undone after you click
Restore.
▶ After making your changes, click Apply changes.
Changes will be transferred to the coupler, the green mark-
ings will be removed.