User Documentation
Web server in force mode | Forcing via the station view
27u-remote web server manual2112220000/06/01.2021
9.2 Forcing via the station view
▶ Click on the channel to be forced.
Dependent on the module type there are different options:
▶ To switch an output, click the switch and then Force.
Forcing an output
▶ To force counter readings, type in the force values and
click Force.
Forcing of modules with registers
▶ To force status or control registers (e.g. with counter mod-
ules or PWM modules), click on the corresponding entry.
Forcing registers
▶ Set or remove the check mark for each register to be
forced and click Apply changes.
▶ Click Force.
The changes are transferred to the coupler.
9.3 Forcing via the detail view
For a better survey change to the detail view. In this view
modules can be shown and hidden, which is helpful, espe-
cially when working with larger stations.
▶ Click Force/Station.
Switching to detail view in force mode