User Documentation
Web server in force mode | Deactivating the force mode
28 2112220000/06/01.2021u-remote web server manual
Detail view of the station in force mode
All active modules are displayed in the detail view. The
switchable channels are provided with a switch.
▶ To see all channel details, click Show all.
▶ To see only the first value of each channel, click Hide all.
Filtering the module view
If you only want to see the modules that you would like to
force, use the lter function.
▶ Click Filter.
▶ To show or hide a module in the overview, click the
respective module in the filter bar.
Filtering the displayed modules
Displayed modules are highlighted grey in the lter bar, while
hidden modules are displayed in white.
Display with filter set
Resettinglters
▶ To display all modules again, click All.
▶ To hide all modules, click None.
Forcing channels
Depending on the module type you can force channels di-
rectly either by clicking on the switch or typing in a value.
▶ Enter the desired changes.
Each change is marked with a green symbol until it is ap-
plied. All changes will only be saved after you click Apply
changes. All changes will be undone after you click Re-
store.
▶ After entering your changes, click Apply changes to
start forcing.
Changes are transferred to the coupler, the green markings
are removed.
9.4 Deactivating the force mode
▶ To deactivate the force mode, click Force/Disable.
Deactivating force mode
The station is reset to the state it had before the force mode
was started.