User Documentation
29u-remote web server manual2112220000/06/01.2021
10 Updating the rmware
▶ Download the latest firmware for each component you
want to update from the Weidmüller website.
Firmware les for eldbus couplers have the extension .bsc.
For PROFINET couplers, for instance, the le might be named
FBC-PN-IRT-00XX.bsc. The compatibility is checked during
uploading the coupler rmware. Thus it is not possible to
load an incompatible coupler rmware.
Firmware les for modules have the extension .bsm. You can
determine for each individual module of a station whether an
update is to be carried out.
– A rmware update cannot be undone. The old
rmware in the coupler/module is overwritten.
– While uploading the firmware files you cannot
access the station via the web server.
– Make sure, that while uploading the firmware
files
– the power supply will not be interrupted,
– no modifications are carried out on the
u-remote station.
▶ To carry out a firmware update, click Firmware on the
menue bar.
Menue firmware update
All components with a rmware are displayed with their ver-
sion status.
Updating the firmware
Single update
▶ If you want to update the firmware of a single component
(e.g. only the coupler), click Select firmware beside this
component.
▶ Select the firmware file from the storage location on your
PC and click Open.
▶ Click Update now.
The rmware is updated. Once the data has been trans-
ferred, you are asked to restart the coupler.
▶ Click Reset.
▶ Wait until the coupler has been restarted and the station
view is displayed in the web server.
Multiple update
If you want to update several components, use the multiple
update.
▶ Click Click here below For multi-update and then Select
firmware/language file.
▶ Select the firmware files from the storage location on
your PC and click Open.
The rmware les are displayed in the Firmware multi-update
dialogue.
▶ Checkmark all files you want to update.
Checkmarking firmware files for multiple update
▶ You can deselect single components by clicking on the
checkmark. These components will not be updated.
▶ You can delete each single file in the overview by clicking
on the red and white cross.
▶ After selecting all desired files and the components, click
Update now.