User Documentation
5u-remote web server manual2112220000/06/01.2021
3 Product description and requirements
3.1 Product description
With the web server, the u-remote station is displayed on
a connected PC. This allows you to carry out the following
tasks e.g. for testing purposes, during commissioning or ser-
vice:
– Simulate the operation of the u-remote station
– Query the status of each coupler and module
– Display the parameters of couplers and modules, and
change them for testing purposes
– Access diagnostic information
– Safe the current configuration of a station and load a
saved configuration (UR20-FBC-MOD-TCP and
UR20-FBC-EIP only)
– Operate the station in force mode for testing purposes
3.2 Requirements
Operating system
The u-remote web server can be used with the following op-
erating systems:
– Windows XP
®
– Windows 7
®
– Windows Vista
®
– Windows10
®
For operation with WindowsXP: if you installed
the Siemens Primary Setup Tool, the DLC (data
link control) protocol was also installed. To access
the web server, you must deactivate the DLC pro-
tocol on the USB interface (LAN connection with
WI-UR20-FBC).
Deactivating the DLC protocol (onlyWindowsXP
®
)
Webbrowser
The u-remote web server can be used with the following
browsers:
– Mozilla Firefox 4.0 or higher
– Google Chrome 9.0 or higher
– Opera 10.61 or higher
– Microsoft Internet Explorer 10 or higher
– Microsoft Edge
Screen resolution
When using the web server we recommend a screen resolu-
tion 1280x800 or higher, at least 1024x768. The user
interface is displayed optimally with the browser window
maximised.