User Documentation

6 2112220000/06/01.2021u-remote web server manual
4 Connecting and starting the web server
4.1 Installing the web server via USB
WARNING
Explosion risk!
▶ Prior to starting work, make sure that
there is not a potentially explosive atmos-
phere!
ATTENTION
Risk of severe damage!
▶ Prior to connecting a PC, make sure that the u-remote
station has been earthed properly!
First access to the web server has to be via the USB interface
of the coupler (see section4.2). With couplers designed for
the use with ethernet based bus systems – recognisable by
the RJ45 sockets – the web server can be accessed alterna-
tively via Ethernet (see section5.7).
The USB port acts as an virtual DHCP Server.
Please do not assign any IP addresses to other
devices within the same subnet of the USB
port (default 192.168.1.202, UR20-FBC-EIP:
192.168.5.202), otherwise network failure might
occur.
The USB cable can be a maximum of 2m in
length (Type USB-A to USB Micro-B e.g. Weidmül-
ler Order No. 1487980000). Extension cables
must not be used.
Installing USB device drivers
The driver le is available on the Weidmüller website.
▶ Download the USB driver for the web server.
▶ Unpack the ZIP file.
Windows10
®
▶ Right-click on the usb8023.inf file and select Install.
▶ Confirm the dialogue with Yes.
▶ Right-click on the rndis.inf file and select Install.
▶ Confirm the dialogue with Yes.
The driver is being installed.
After successful installation, a WI-UR20-FBC network adapter is
displayed in the Device Manager.
Windows7
®
or older
▶ To install the driver manually, open the Device Manager.
Under Other devices the USB CDC-RNDIS Network Interface interface
is displayed.
New USB interface in the Device Manager
▶ Right-click on the interface and select Update driver
software.
You will be asked how you would like to search for the driver
software.
▶ Select the option Search for driver software on this
computer.
Searching for installation files on the computer
▶ Click Browse and navigate to the folder in which you
have stored both .inf files.
There could possibly be a security enquiry because the driver
software does not have a signature. Nonetheless, continue
with the installation.