User Documentation
u-view Monitor - 10
UV66-ADV-xy-IPM-10
Montageanleitung
Installation instructions
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
32758 Detmold, Germany
T +49 5231 14-0
F +49 5231 14-292083
www.weidmueller.com
2676860000/01/02.2020
2676660000 UV66-ADV-10-IPM-10
2676670000 UV66-ADV-12-IPM-10
2676680000 UV66-ADV-15-IPM-10
2676690000 UV66-ADV-18-IPM-10
2676700000 UV66-ADV-21-IPM-10
UV66-ADV-10-IPM-10 UV66-ADV-12-IPM-10 UV66-ADV-15-IPM-10 UV66-ADV-18-IPM-10 UV66-ADV-21-IPM-10
Best.-Nr. Order No. 2676660000 2676670000 2676680000 2676690000 2676700000
Spannungsversorgung Power supply 24VDC, isoliert / isolated
Displaygröße Screen size 10.1" 12.1" 15.6" 18.5" 21.5"
Auösung (Pixel) Resolution (pixel) 1280x800 1280x800 1366x768 1366x768 1920x1080
Helligkeit (cd/m²) Brightness (cd/m²) 400 400 400 300 300
Farbe Colour 16 M 16 M 16 M 16 M 16 M
Touchscreen Touchscreen Kapazitiv Multitouch / Capacitive multitouch
Typ Type Color LCD TFT
Material Display Display material Glas / glass
Material Rahmen Frame material Aluminium
Schnittstellen Interfaces 1 x VGA, 1 x DVI-D, 2 x USB 2.0 (Type A)
Maße Dimensions Siehe Maßzeichnung / See dimension drawing
Gewicht Weight 4900g 5200g 6000g 7300g 8400g
Schutzart Protection degree IP66
Umgebungstemperatur Betrieb Ambient temperature operations 0°C ... +50°C
Umgebungstemperatur Transport,
Lagerung
Ambient temperature transport,
storage
-5°C ... +60°C
Luftfeuchtigkeit Humidity 80 % (non-condensing)
Normen, Zulassungen Standards, approvals CE, EN 61000-3-2,-3, EN 55022, EN 55024, EN 60950-1, cULus, UL 508
Lieferumfang
– 1 Monitor
– Befestigungshaken mit Schrauben
– 1 DC-Anschlussstecker
– 1 Kappe für DC-Anschlussstecker
– 1 Innensechskantschlüssel 1,5mm
– Montageanleitung
Scope of delivery
– 1 monitor
– Clamps with grub screw
– 1 DC power supply connector
– 1 cover for power supply connector
– 1 hex key 1.5mm
– Installation instructions
EDC
A
B
LCD A B C D E
UV66-ADV-10-IPM-10 10.1" 293 212 45 19 5
UV66-ADV-12-IPM-10 12.1" 331 234 45 23 5
UV66-ADV-15-IPM-10 15.6" 433 280.5 45 36 6
UV66-ADV-18-IPM-10 18.5" 503 320.5 45 35 6
UV66-ADV-21-IPM-10 21.5" 581.5 367.5 45 35 8
Maße (mm) / Dimensions (mm)
Technische Daten / Technical data
LCD
E
(mm)
F
(mm)
UV66-ADV-10-IPM-10 10.1" 277 196
UV66-ADV-12-IPM-10 12.1" 313 218
UV66-ADV-15-IPM-10 15.6" 410 255
UV66-ADV-18-IPM-10 18.5" 480 300
UV66-ADV-21-IPM-10 21.5" 559 347
X Y Z
> 20mm > 20mm > 20mm
ACHTUNG
Der Schutzgrad IP66 wird nur erreicht,
wenn die folgenden Bedingungen einge-
halten werden:
– Die Montagewand ist zwischen 2 und
6mm dick.
– Die Montagewand darf in alle Richtun-
gen um maximal 0,5mm deformierbar
sein.
– Im Auflagebereich der Dichtung darf
die Rauheit der Oberfläche maximal
120micron betragen (Rz120).
ATTENTION
Protection class IP66 will only be
achieved with the following preconditions
fullled:
– The mounting panel width is between
2 and 6mm.
– The maximum deformablility of the
mounting panel shall be 0.5mm in all
directions.
– The surface roughness of the sealing
contact area may be 120micron
(Rz120) at maximum.
Montagewand vorbereiten / Preparing the mounting panel
Montageausschnitt / Panel cut-out Montageabstände / Mounting distances
Monitor montieren / Mounting the monitor
max. 0.2 Nm
4.3.
2.1.
Sicherheitshinweise
IP66 wird nur erreicht, wenn
die Montagehinweise beachtet
werden.
Das Gerät darf nur von quali-
ziertem Fachpersonal montiert
werden.
▶ Lesen Sie vor Beginn der
Montage die Dokumentation.
Bestimmungsgemäßer Gebrauch
Das Produkt ist für den Einsatz in der indus-
triellen Automation vorgesehen. Es kann zur
Überwachung und Steuerung von Maschi-
nen und Anlagen eingesetzt werden.
Das Produkt entspricht der Schutzart IP66
(gem. IEC60529), es ist nicht für den
Einsatz im explosiongefährdeten Bereich
vorgesehen.
Das Produkt darf nur für die vorgesehenen
Einsatzfälle verwendet werden. Zum be-
stimmungsgemäßen Gebrauch gehört auch
das Beachten der Dokumentation.
Safety instructions
IP66 will only be achieved if
the mounting instructions are
observed.
The equipment may be installed
only by qualied experts.
▶ Prior to starting installation,
read the documentation.
Intended use
The product is intended for use in industrial
automation. It can be used for the monitor-
ing and control of machines and production
lines.
The product meets the requirements of
protection class IP66 (as per IEC60529),
it cannot be used in potentially explosive
atmospheres.
The product may only be used for the in-
tended applications. The observance of the
documentation is part of the intended use.