Approval/Certificate/Document of Conformity

ANNEX TO KEMA-KEUR CERTIFICATE 71-100042 page 3 of 3
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The Netherlands
T [phone] F [phone] www.dekra-certification.com Company registration 09085396
Product data – type WDU 6
Rated insulation voltage : 800 V
Rated impulse withstand voltage : 8 kV
Conventional free air thermal current : 41 A
Rated cross-section : 6 mm²
Rated connecting capacity : 0,5 mm² - 10 mm² rigid or flexible
2 wires with the same cross section:
0,5 mm² - 2,5 mm² rigid or flexible
Torque clamping unit : 0,8 Nm
Method of mounting : top hat rail 35 mm
Product data – type WDU 70/95
Rated insulation voltage : 1000 V
Rated impulse withstand voltage : 8 kV
Conventional free air thermal current : 232 A
Rated cross-section : 95 mm²
Rated connecting capacity : 16 mm² - 120 mm² rigid
16 mm² - 95 mm² flexible
2 conductors with the same cross section:
16 mm² - 35 mm² rigid or flexible
Torque clamping unit : 6 Nm - 12 Nm
Method of mounting : top hat rail 35 mm
TESTS
Test requirements
EN 60947-7-1:2009
Test result
The test results are laid down in DEKRA test file 219930100.
Additional Information
This certificate replaces the following certificates issued on 26 March 2009:
2121320.02 (WDU 2.5)
2121320.03 (WDU 4)
2121320.04 (WDU 6)
2121320.05 (WDU 10)
2121320.06 (WDU 16)
2121320.07 (WDU 35)
2121320.08 (WDU 70/95)
2121320.09 (WDU 120/150)
Conclusion
The examination proved that all requirements were met.
Factory location
Weidmüller Interface GmbH & Co. KG
Klingenbergstrasse 16
32758 Detmold, Germany