User Documentation

Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany
Model: WPD 133
Screw (direct)
mounting with
screw acc. to
DIN 4762
1100
TS 35 mounting
1100
For busbar
(Flexibar) with
screw mounting
NA
For busbar
(Flexibar) with
TS35 mounting
NA
Model:
WPD 133
current [A]: 520
Model WPD 133
Wire type
Left Center Right
Solid
- 150…300mm² -
Stranded
- 150…300mm² -
Flexible with ferrule
- 120…240mm² -
Wire type
Left Center Right
Solid
- 150…300mm² 1.5…10mm²
Stranded
- 150…300mm² 1.5…10mm²
Flexible with ferrule
- 120…240mm² 1.5…6mm²
Note:
The creepage and clearance distances were determined in the worst case. (with tightened screw)
If smaller cross sections than the rated cross section are used, the belonging lower current has to be laid down in the IECEx/EC-Type
Examination Certificate of the complete apparatus.
Mounting instructions:
The WPD series is suitable for application in enclosures in atmospheres with flammable gases or combustible dust. For use in flammable
gases these enclosures must satisfy the requirements according to IEC/EN60079-0 and IEC/EN60079-7. For use in combustible dust these
enclosures must satisfy the requirements according to IEC/EN60079-0 and IEC/EN60079-31.
In combination with other terminal block series and sizes and if other accessories are used, the applicable creepage and clearance distances
shall be met.
To connect 2 wires in 1 connection point, please use twin end ferrules with DIN or Weidmüller colour code in combination with the correct
Weimüller Crimping Tool.
Regarding the use of accessories the instructions of the manufacturer must be followed.
Electrical Data:
Rated conductor cross sections
Incoming connection
Size [mm2]
Outgoing connections
Size [mm2]
Rated incoming currents
Max. rated voltage [V]:
Version: WFF 35/AH 6951267 Index: 00 Date: 01.2016
2