Approval/Certificate/Document of Conformity

ANNEX TO KEMA-KEUR CERTIFICATE 71-100103 page 3 of 4
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The Netherlands
T [phone] F [phone] www.dekra-certification.com Company registration 09085396
Description : fuse terminal block with screw type terminals, 1-pole with
two clamping units per pole. for connection with fuse holder
SIHA 3/G20 or SIHA 3/G20/LD
overload and short circuit protection:
separate arrangement: PV 2,5 W / 6,3 A
compound arrangement: PV 1,6 W / 6,3 A
exclusive short-circuit protection:
separate arrangement: PVK 4 W / 6,3 A
compound arrangement: PVK 2,5 W / 6,3 A
Product data – type WTR 4/SI
Rated connecting capacity : 4 mm² rigid or flexible
Rated cross-section : 0,5 mm² - 4 mm² flexible
0,5 mm² - 6 mm² rigid
Stripping length : 13 mm
Rated voltage : 250 V (fuse holder)
400 V (terminal block)
Rated impulse withstand voltage : 4 kV (fuse holder)
6 kV (terminal block)
Rated current : 6,3 A
Torque : 0,5 Nm - 0,6 Nm
Fuse size : 5 x 20 mm
Description : fuse terminal block with screw type terminals, 1-pole with
two clamping units per pole. for connection with fuse holder
SIHA 3/G20 or SIHA 3/G20/LD
overload and short circuit protection:
separate arrangement: PV 2,5 W / 6,3 A
compound arrangement: PV 1,6 W / 6,3 A
exclusive short-circuit protection:
separate arrangement: PVK 4 W / 6,3 A
compound arrangement: PVK 2,5 W / 6,3 A
TESTS
Test requirements
EN 60947-7-3:2009
Test result
The test results are laid down in DEKRA test file 221554400.
Additional Information
This certificate replaces type WSI 6 in certificate 2136031.01 issued on 11 October 2010
Conclusion
The examination proved that all requirements were met.