Document of Conformity

[13]

Schedule

[14]

EC-TYPE EXAMINATION CERTIFICATE No.

DEMKO 03 ATEX 136028U

Rev. 1

Report: 12CA09494

00-IC-F0057 – Issue 5.1 This certificate may only be reproduced in its entirety and without any change, schedule included. Page 3 of 3

[16] Descriptive Documents

Project Report No.: 12CA09494 (Hazardous Location Testing)

Description: Document No.: Rev. Level: Date:

Zugbügel ZB 4 441547 0 11.03.2005

Zugbügel ZB 4K 405691 11 11.03.2005

Zugbügel ZB 4G 410332 6 11.07.2006

Zugbügel ZB 4/6 406744 2 23.02.2010

Zugbügel ZB 4/6K 406653 4 09.02.2000

Zugbügel ZBE 6 405472 1 05.12.1996

Zugbügel ZBE 6K 406310 2 24.09.1997

Zugbügel ZB 10 411385 2 30.11.2000

Zugbügel ZB 16 403330 12 12.03.2008

Zugbügel ZB 16K 406124 7 11.03.2005

Zugbügel ZB 16/6 406745 2 17.03.1998

Zugbügel ZB 35 402644 5 30.11.1999

Zugbügel ZB 35K 406121 10 11.07.2000

Isolierkappe ISKA ZB4 405636 10 10.03.2005

Isolierkappe ISKA ZBE6K 406312 2 24.10.2006

Isolierkappe ISKA ZB16 406125 4 10.03.2005

Isolierkappe ISKA ZB35K 406123 3 20.08.2009

Endwinkel WEW 35/1 & ATEX Markierungen 412113 10 22.06.2010

Endwinkel WEW 35/2 & ATEX Markierungen 415292 12 25.03.2010

Schienenhalter SH 1 & ATEX Markierungen 402961 8 23.04.2004

Schienenhalter SH 2 & ATEX Markierungen 405980 8 25.04.2004

Schienenhalter SH 2 S & ATEX Markierungen 407387 9 06.04.2004

Schienenhalter SH 3 & ATEX Markierungen 306740 4 27.10.2006

Neutral Busbar NSCH 408049 9 18.12.2007

Pressure Piece DKSUE NSCH 402719 2 29.02.2012

[17] Schedule of Limitations:

The Earthing Busbar assemblies described above are considered to form one component, with Ex marking applied to the busbar

holders type SH and WEW. If used independently, the above mentioned parts are not covered by this certificate.

The maximum temperature rise was determined as 14.2K (for busbar system type ZB).

The maximum temperature rise was determined as 23.9K (for busbar system type NSCH).

[18] Essential Health and Safety Requirements

Concerning ESR this Schedule verifies compliance with the Annex III of 94/9/EC directive only. The manufacturer's Declaration of

Conformity declares compliance with other relevant requirements and Directives.

The manufacturer shall inform the notified body concerning all modifications to the technical documentation as described in ANNEX III

to Directive 94/9/EC of the European Parliament and the Council of 23 March 1994.