Approval/Certificate/Document of Conformity

KEMA ~
Translation, originallanguage: German
(1) EC-TVPE EXAMINATION CERTIFICATE
(2) Equipment and protective systems intended for use in potentially explosive
atmospheres - Directive 94/9/EC
(3)
EC-Type Examination Certificate Number: KEMA 97ATEX2521 U
Issue Number: 2
(4) Component: Terminal Blocks Types ZDU 2.5, ZDU 2.5/3AN, ZDU 2.5/4AN, ZDU 2.5/2x2AN, ZDU 4, ZDU 6
and Protective Conductor Terminal Blocks Types ZPE 2.5, ZPE 2.5/3AN, ZPE 2.5/4AN, ZPE 4
and ZPE 6.
(5) Manufacturer: Weidmüller Interface GmbH & Co. KG
(6) Address:
Klingenbergstraße 16, D-32758 Detmold, Germany
(7) This component and any acceptable variation thereto is specified in the schedule to this certificate and the
documents therein referred to.
(8) KEMA Quality B.V., notified body number 0344 in accordance with Article 9 of the Council Directive 94/9/EC of
23 March 1994, certifies that this component has been found to comply with the Essential Health and Safety
Requirements relating to the design and construction of equipment and protective systems intended for use in
potentially explosive atmospheres given in Annex 11 to the directive.
The examination and test results are recorded in confidential report no. 212092800.
(9) Compliance with the Essential Health and Safety Requirements has been assured by compliance with:
EN 60079-0 : 2004
EN 60079-7 : 2003
(10) The sign "U" placed after the certificate number indicates that this certificate describes components and must not
be mistaken for a certificate intended for an equipment or protective system. This EC-Type Examination Certificate
may be used as a basis for certification of an equipment or protective system.
(11) This EC-Type Examination Certificate relates only to the design, examination and tests of the specified component
according to the Directive 94/9/EC. Further requirements of the directive apply to the manufacturing process and
supply of this component. These are not covered by this certificate.
(12) The marking of the component shall include the following:
This certificate is issued on December 17, 2008 and, as far as applicable, shall be revised before the date of
cessation of presumption of conformity of (one of) the standards mentioned above as communicated in the Official
Journal of the European Union.
KEMA Quality
112GD
Ex e 11
Page 1/3
Q
PRooucrs
RvAC 001
~ Integralpublication 01 thiscertilicateandadjoiningreportsisallowed.ThisCertificatemayonlybereproducedinitsentiretyandwithoutanychange.
KEMA Quality B.V. Utrechtseweg 310, 6812 AR Arnhem P.O. Box 5185,6802 ED Arnhem, The Netherlands
T [phone] F [phone] [e-mail] www.kema.com Registered Arnhem 09085396
Experience you can trust.