Document of Conformity

KE.MA

='<

(13)

SCHEDULE

(14)

to EC-Type Examination Certificate KEMA 97ATEX2521 U

Installation instructions

Issue No. 2

The Terminal blocks and Protective conductor terminal blocks are suitable for use in enclosures in

atmospheres with f1ammable gases or combustible dust. For flammable gases these enclosures

must satisfy the requirements according to EN 60079-0 and EN 60079-7. For combustible dust these

enclosures must satisfy the requirements according to EN 50281-1-1 or EN 61241-series.

When assembling with other certified series and sizes and using belonging accessories, the

required creepage distances and clearances have to be observed.

Regarding the use of covers, cross-connectors and end brackets the instructions of the

manufacturer must be followed.

If conductors with sm aller cross sections as the rated cross section are used, the belonging lower

current has to be laid down in the EC-Type Examination Certificate of the complete equipment.

The Terminal blocks and Protective conductor terminal blocks may be used at ambient

temperatures of -50°C to +40 °C at the mounting position in electrical apparatus, e.g. junction and

connection boxes, for temperature class T6. When the Terminal Blocks are used in electrical

apparatus of temperature classes T1 up to T5, the highest temperature of the insulating material

shall not exceed the maximum value of the operating temperature range.

(16) Report

KEMA No. 212092800

(17) Special conditions for safe use

None.

(18) Essential Health and Safety Requirements

Covered by the standards listed at (9).

(19) Test documentation

As listed in Test Report No. 212092800.

CERT12 V1.1

Page 3/3