Approval/Certificate/Document of Conformity

Translation, orlglnallanguage: German
(1) EC- TYPE EXAMINA TION CERTIFICA TE
(2) Equlpment and protective systems intended for use in potentially explosive
atmospheres - Oirective 9419/EC
(3) EC-Type Examination Certificate Number: KEMA 06ATEX0271 U Issue Number: 1
(4) Component: Feed through terminal blocks Types ZDU 2.5N, ZDU 2.5Nf3AN, ZDU 2.5Nf4AN, ZOK 2.5/3AN,
ZDK 2.5f3AN V and
Protectlve conductor terminal blocks Types ZPE 2.5N, ZPE 2.5N13AN, ZPE 2.5N/4AN,
ZDK 2.5/3AN PE and
Feed through/Protectlve conductor terminal blocks Type ZDK 2.5/3AN DU·PE
(5) Manufacturer: Weidmüller Intelface GmbH & Co KG
(6) Address: Klingenbergstraße 16, 0-32758 Detmold, Germany
(7) Thls component and any acceptabJe variation thereto is speclfied in the schedule to this certificate and the
documents therein referred to.
(8) KEMA Quality sv., notified body number 0344 in accordance with Article 9 of the Council Directive 94/9/EC of
23 March 1994, certifies that this component has been found to comply with the Essential Health and Safety
Requirements relating to the design and construction of equipment and protective systems intended for use in
potentiaUy explosive atmospheres given in Annex 11to the directive.
The examination and test results are recorded in confidentiaJ report no. 2097003.
(9) Compliance with the Essential Health and Safety Requirements has been assured by compliance with:
EN 60079-0 : 2006
EN 60079-7 : 2003
EN 50281-1-1: 1998 +A1
(10) The sign "U' placed after the certificate number indicates that this certificate describes components and must not
be mlstaken for a certificate intended for an equipment or protective system. This EC·Type Examination Certificate
may be used as a basis for certification of an equipment er protective system.
(11) This EC-Type Examination Certificate relates only to the design, examination and tests ofthe specified component
according to the Directive 94/9/EC. Further requirements of the directive apply to the manufacturing process and
supply of this component. These are not covered by this certificate.
(12) The marking ofthe component shalllnclude the following:
112GD Exell
This certificate is issued on 8 March 2007 and, as tar as applicable, shall be revised before the date of cessation of
presumption of conformity of (one of) the standards mentioned above as communicated in the Official Journal of
the European Union.
Page 1/4
ro Integral publication 01 this certiflcale and adjoining reporls is allowed. This Certificale may only be reproduced in rts entirety and withou! any change
KEMA Quality SV. Utrechtseweg 310, 6812 AR Arnhem P.O. Box 5185, 6802 ED Arnhem, The Netherlands
T [phone] F [phone] [e-mail] www.kema.com Registered Arnhem 09085396
Experience you can trust