Data Sheet
Datenblatt
W-Series
WNT 10 10X3
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum December 13, 2013 11:05:57 AM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Length 60 mm
Width 9.9 mm
Height of lowest version 47 mm
Weight
24.28 g
Net weight 23.78 g
Temperatures
Operating temperature
Storage temperature
Continuous operating temp., min. -50 °C
Continuous operating temp., max. 120 °C
Additional technical data
Explosion-tested version No
Installation advice Direct mounting
Number of similar terminals 1
Open sides right
Type of mounting
Snap-on
Version Screw connection, with
busbar connection
10x3, One end without
connector
CSA ratings data
Certificate No. (CSA) 200039-1057876
Voltage size C (CSA) 600 V
Current size C (CSA) 50 A
Wire cross section max. (CSA)
6 AWG
Wire cross section min. (CSA) 16 AWG
Clampable wires (additional connection)
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, min. 1.5 mm²
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, max. 16 mm²
Clampable wires (rated connection)
Type of connection Busbar connection
Stripping length 12 mm
Blade size 1.0 x 5.5 mm
Connection direction on side
Number of connections 1
Clamping range, rated connection, min. 1.31 mm²
Clamping range, rated connection, max. 16 mm²
Clamping screw M 4
Tightening torque, min. 1.2 Nm
Tightening torque, max. 2 Nm
Torque level with DMS electric
screwdriver 4
Gauge to IEC 60947-1
B6
Wire connection cross section, solid
core, max. rated connection 1.5 mm²
Wire connection cross section, solid
core max. rated connection 16 mm²
Wire connection cross section, stranded,
rated connection, min. 1.5 mm²
Wire connection cross section, stranded,
rated connection, max. 16 mm²
Wire connection cross section, finely
stranded, max. 16 mm²
Wire connection cross-section, finely
stranded, min. 1.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min. 1.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max. 16 mm²
N-conductor disconnect terminal
For N-busbar 10 x 3 mm