Data Sheet
Datenblatt
W-Series
WDL 2.5/S/NT/L/PE
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum December 13, 2013 11:39:09 AM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Length 84.5 mm
Width 6.1 mm
Height 48 mm
Height of lowest version
49 mm
Net weight 18.39 g
Temperatures
Operating temperature
Storage temperature
Continuous operating temp., min. -50 °C
Continuous operating temp., max. 120 °C
Additional technical data
Explosion-tested version No
Installation advice Direct mounting
Number of similar terminals 1
Open sides right
Type of mounting
Snap-on
Version Screw connection, NT,
L and PE connection,
with busbar connection
10x3, for plug-in cross-
connector, One end
without connector
CSA ratings data
Certificate No. (CSA) 12400-296
Voltage size B (CSA) 300 V
Voltage size D (CSA) 300 V
Current size B (CSA) 10 A
Current size D (CSA) 10 A
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA) 26 AWG
Clampable wires (additional connection)
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, min. 0.5 mm²
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, max. 2.5 mm²
Clampable wires (rated connection)
Type of connection Screw connection
Stripping length 8 mm
Blade size 0.6 x 3.5 mm
Connection direction on side
Number of connections 4
Clamping range, rated connection, min. 0.13 mm²
Clamping range, rated connection, max. 4 mm²
Clamping screw M 2.5
Tightening torque, min. 0.4 Nm
Tightening torque, max. 0.6 Nm
Torque level with DMS electric
screwdriver 1
Gauge to IEC 60947-1
A3
Wire connection cross section, solid
core, max. rated connection 0.5 mm²
Wire connection cross section, solid
core max. rated connection 4 mm²
Wire connection cross section, stranded,
rated connection, min. 1.5 mm²
Wire connection cross section, stranded,
rated connection, max. 4 mm²
Wire connection cross section, finely
stranded, max. 4 mm²
Wire connection cross-section, finely
stranded, min. 0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min. 0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max. 2.5 mm²
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min. 0.25 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max. 2.5 mm²
Wire connection cross section AWG,
min. AWG 26
Wire connection cross section AWG,
max. AWG 12