Data Sheet
Datenblatt
TERMOPTO
TOP 120VAC/48VDC 0.5A RC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum December 17, 2013 12:58:55 PM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Width 6.1 mm
Height 79.5 mm
Depth 55 mm
Net weight 19.7 g
Temperatures
Humidity 5–95% rel. humidity, T
u
=
40°C, no condensation
Operating temperature
-20 °C...+60 °C
Storage temperature -40 °C...+80 °C
Probability of failure
MTTF 2,500 Years
control side
Cut-in dropout voltage 102 V / 48 V AC
Rated control voltage 120 V AC ±20 %
Nominal control current 6.4 mA AC
Power rating ≤ 0.61 VA
Input frequency < 10 Hz
Protective circuit, control side
RC element
Status display on control side Green LED
Load side
Solid-state type Transistor
Rated switching voltage 5...48 V DC
Continuous current 500 mA
Rated switching current 500 mA
Switch-on delay < 12.6 ms
Switch-off delay < 20.8 ms
Load category DC1
Leakage current < 10 µA
Protective circuit, load side Diode
Voltage drop at max. load < 1 V
Load side status indicator No
Short-circuit-proof No
General data
Solid-state type Transistor
No. of poles 1
Wire connection method
PUSH IN spring
connection
Humidity 5–95% rel. humidity, T
u
=
40°C, no condensation
UL 94 flammability rating
V-0
Standards DIN EN 50178, IEC
62314, UL508
Wire cross-section, solid, max.
1.5 mm²
Wire connection cross section, finely
stranded, max. 1.5 mm²
Insulation coordination
Rated voltage
300 V
Clearance and creepage distances for
control side - load side > 3 mm
Dielectric strength for control side - load
side
1.2 kV
eff
/ 1 min.
Impulse withstand voltage
4 kV (1.2/50 µs)
Pollution severity 2
Surge voltage category III
Further details of approvals
Standards DIN EN 50178, IEC
62314, UL508