Data Sheet

Datenblatt


Erstellungs-Datum December 20, 2013 7:59:07 AM CET
 Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 1
Accessories
ZB 10 F.10X3/10X5/10X10
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: [phone]
Fax: [phone]
www.weidmueller.com
General ordering data

Type ZB 10 F.10X3/10X5/10X10
Order No. 1261300000
Version Accessories, Clamping yoke for busbar, Rated
cross-section: Clamping yoke, Busbar
GTIN (EAN) 4008190180201
Qty. 50 pc(s).



In the switching facilities and controllers, the N conductor
may need to be merged with the PE conductor at a
central point. For this reason, busbars are available that
allow a wide range of cables to be connected within a
confined space (up to 70 wires on one metre of rail).
The cables are connected via a compression piece or
a clamping yoke. For the first variant there is no need
to bend the lugs. A guide lug at the compression piece
grips into the busbar and holds tightly to the compression
piece. The clamping yokes can be moved on the busbar
and adjusted to the whole wiring in the facility. The
busbar can be used without holes in various lengths. The
rail holding clamp SH is used for fastening. On longer
rails, it can also be aligned between clamping yokes.