Data Sheet
Data sheet
TERMSERIES
TRS 24VUC 1CO 16A
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date May 27, 2019 2:40:37 PM CEST
Catalogue status 23.05.2019 / We reserve the right to make technical changes. 3
Insulation coordination
Rated voltage 300 V
Surge voltage category III
Pollution severity 2
Protection degree IP20
Dielectric strength, Input/Output
1.2 kV
eff
/ 5 s
Creepage and clearance distance input –
output ≥ 5.5 mm
Dielectric strength of open contact 1 kV
eff
/ 1 min
Dielectric strength to mounting rail
4 kV
eff
/ 1 Min.
Impulse withstand voltage 6 kV (1.2/50 µs)
Further details of approvals / standards
Standards EN 50178, EN 55011, EN
61000-6-1, 2, 4
Certificate No. (DNVGL)
TAA00001E5
Certificate no. (cULus) E141197
Connection data
Wire connection method Screw connection
Stripping length, rated connection 8 mm
Tightening torque, max. 0.4 Nm
Clamping range, rated connection 1.5 mm²
Clamping range, min. 0.14 mm²
Clamping range, max. 2.5 mm²
Wire connection cross section AWG,
min. AWG 26
Wire connection cross section AWG,
max. AWG 14
Wire cross-section, solid, min. 0.14 mm²
Wire cross-section, solid, max. 2.5 mm²
Wire connection cross-section, finely
stranded, min. 0.14 mm²
Wire connection cross section, finely
stranded, max. 2.5 mm²
Wire cross-section, finely stranded, min.
(AWG) AWG 26
Wire cross-section, finely stranded, max.
(AWG) AWG 14
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, min. 0.25 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, max. 2.5 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), min. 0.25 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), max. 2.5 mm²
Wire connection cross section, finely
stranded, two clampable wires, min. 0.5 mm²
Wire cross-section, finely stranded, two
clampable wires, max. 1 mm²
Twin wire-end ferrules, min. 0.5 mm²
Twin wire-end ferrules, max. 1 mm²
Blade size size PH0
Gauge to IEC 60947-1 A1, B1
Classifications
ETIM 5.0 EC001437
ETIM 6.0 EC001437
eClass 6.2 27-37-16-01
eClass 7.1 27-37-16-01
eClass 8.1 27-37-16-01
eClass 9.0
27-37-16-01
eClass 9.1 27-37-16-01
Approvals
Approvals
ROHS Conform