Datasheet
Data sheet
Z-series
ZPE 4
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date November 21, 2013 4:05:52 PM CET
Catalogue status / We reserve the right to make technical changes. 2
Dimensions and weights
Length 64 mm
Width 6.1 mm
Height 43 mm
Height of lowest version
43.5 mm
Net weight 15.96 g
Temperatures
Operating temperature
Storage temperature
Continuous operating temp., min. -50 °C
Continuous operating temp., max. 120 °C
Rated data IECEx/ATEX
Certificate No. (ATEX) KEMA97ATEX2521U
ATEX certificate KEMA97ATEX2521U_d.pdf
ATEX certificate KEMA97ATEX2521U_e.pdf
IEC Ex certificate IECEXULD05.0009U_e.pdf
Wire cross section max. (ATEX) 4 mm²
Voltage, cross-connection CrossConnectionGuide.pdf
Operating temperature range For operating temperature
range see EC Design
Test Certificate / IEC Ex-
Certificate of Conformity
Marking EN 60079-7
Ex e II
Marking ATEX Directive 94/9/EC II 2 G D
Additional technical data
Explosion-tested version Yes
Number of similar terminals 1
Open sides right
Type of mounting
Snap-on
Version Tension-clamp connection,
With PE connection, One
end without connector
CSA ratings data
Certificate No. (CSA) 200039-1152892
Wire cross section max. (CSA)
10 AWG
Wire cross section min. (CSA) 26 AWG
Clampable wires (additional connection)
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, min. 0.5 mm²
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, max. 4 mm²