Datasheet

Terminals, Z-Series
C.2
C
Product overview
Rated cross-section 1.5 mm
2
2.5 mm
2
4 mm
2
6 mm
2
10 mm
2
16 mm
2
35 mm
2
Standard Roof Standard Roof Standard Roof Standard Roof Standard Roof Standard Roof Standard Roof
Feed-through terminals
2 connections • ••••••• •••
3 connections • ••••••• •
4 connections •••••
2 x 2 connections ••
Protective earth terminals
2 connections • ••••••• •••
3 connections • ••••••• •
4 connections •••••
Fuse terminal • • •
Measuring and isolating terminal • • •
Supply terminal •••
Neutral conductor terminal ••••••
Double level terminal • • • • •
3-core distribution terminals •
Pluggable terminals •
Miniature block terminals •
Initiator/actuator terminals •
Terminals with electronic components • •
Overview
Terminals with tension clamp technology, the Z series, are made
to suit a wide range of customer applications. They are:
Small structural dimensions, large marking surface, integrated
test point, cross-connection ability within the Z series and to
other Weidmüller terminal families.
The terminals in the Z series have a wide clamping range and
up to two cross-connection channels.
The potential can be distributed across any number of channels
using the pluggable cross-connections system.
Z-standard
• Conductor cross-sectional
areas ranging from 0.08 to
35 mm
2
• Top-entry conductor entry
parallel to screwdriver
actuation
Tension clamp connection
Design
Z roof
• Conductor cross-sectional
areas ranging from 0.13 to
16 mm
2
• Up to 36% reduction in length
• Slanting actuation direction