Datasheet
Data sheet
Z-series
ZDK 2.5PE
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 1429-0
Fax: +49 5231 14292083
www.weidmueller.com
Technical data
Creation date August 14, 2017 12:28:09 PM CEST
Catalogue status 02.08.2017 / We reserve the right to make technical changes. 2
Dimensions and weights
Width 5.1 mm
Width (inches) 0.201 inch
Height 79.5 mm
Height (inches) 3.13 inch
Depth 53 mm
Depth (inches) 2.087 inch
Depth including DIN rail 54 mm
Net weight 14.8 g
Temperatures
Continuous operating temp., min. -50 °C
Continuous operating temp., max. 120 °C
Material data
Material Wemid
Colour
green / yellow
UL 94 flammability rating V-0
Rating data IECEx/ATEX
Certificate No. (ATEX) KEMA97ATEX4677U
ATEX certificate KEMA97ATEX4677U_d.pdf
ATEX certificate KEMA97ATEX4677U_e.pdf
Certificate No. (IECEX) IECEXULD05.0009U
IEC Ex certificate IECEXULD05.0009U_e.pdf
Wire cross section max. (ATEX) 2.5 mm²
Wire cross section max. (IECEX) 2.5 mm²
Voltage, cross-connection CrossConnectionGuide.pdf
Operating temperature range For operating temperature
range see EC Design
Test Certificate / IEC Ex-
Certificate of Conformity
Marking EN 60079-7
Ex e II
Ex 2014/34/EU label II 2 G D
System specifications
Version Tension-clamp connection,
With PE connection, One
end without connector
End cover plate required
Yes
Number of levels 2
No. of clamping points per level 2
Levels cross-connected internally Yes
PE connection Yes
Mounting rail TS 35
PEN function No
Additional technical data
Explosion-tested version Yes
Installation advice Direct mounting
Number of similar terminals 1
Open sides
right
Type of mounting Snap-on
CSA rating data
Certificate No. (CSA) 12400-367
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA) 26 AWG