Datasheet

Overview HDC
A
A.17
1çnç
Technical data
Tightening torques and screwing tools
Screw size Connector type Dia. tightening torque in Nm Recommended blade inserts and AF size for hexagon socket
M 2.5 Signal contacts
S 6/6 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
S 6/12 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
M 2.9 x 0.5 Fastening screws
HQ 4/2 0.8 (plastic) / 1.1 (metal) SD 0.6 x 3.5 mm or PH0
HQ 8 0.8 (plastic) / 1.1 (metal) SD 0.6 x 3.5 mm or PH0
HQ 17 0.8 (plastic) / 1.1 (metal) SD 0.6 x 3.5 mm or PH0
M 3 Contact screws
HA 3 0.5 - 0.55 SD 0.5 x 3.0 mm
HA 4 0.5 - 0.55 SD 0.5 x 3.0 mm
HA 10 bis HA 48 0.5 - 0.55 SD 0.6 x 3.5 mm or PH0
HE 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
HVE 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
Signal contacts:
S 4/2 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
S 4/8 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
PE connection via female contact
S 4 0.5 - 0.8 SD 0.6 x 3.5 mm
ConCept modular frame, metal 0.5 - 0.55 SD 0.6 x 3.5 mm
PE terminal
HQ 5 0.5 - 0.55 SD 0.6 x 3.5 or 0.8 x 4 mm
HQ 7 0.5 - 0.55 SD 0.6 x 3.5 or 0.8 x 4 mm
Fastening screws
0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
Guide pin
0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
Guide bush
0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
Coding pins
0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
M 4 Contact screws
HSB 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PZ1
PE connection via male contact
S 4 0.5 - 0.8 SD 0.6 x 3.5 mm
ConCept modular frame, metal 1.2 - 1.5 SD 0.6 x 3.5 mm
PE terminal
HA 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PH1
HE 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PH1
HEE 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PH1
HVE 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PH1
HD 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PZ1
HDD 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PZ1
S 6/6 (for signal contacts) 1.2 - 1.5 0.8 x 4 mm or PZ1
ConCept modular frame, plastic 1.2 - 1.5 0.8 x 4 mm or PZ1
M 5 PE terminal
HSB 2 - 2.5 SD 1 x 5.5 mm or PZ2
S 4/0 (Screw connection) 2 - 2.5 SD 1.2 x 6.5 mm or PH2
S 4/0 (Axial screw connection) 2 - 2.5 SD 0.8 x 4 mm or PZ 2
S 4/2 2 - 2.5 SD 1.2 x 6.5 mm or PH2
S 4/8 2 - 2.5 SD 1.2 x 6.5 mm or PH2
S 6/12 2 - 2.5 SD 0.8 x 4 mm or PZ 2
S 6/36 2 - 2.5 SD 1.2 x 6.5 mm or PH2
S 8/24 2 - 2.5 SD 1.2 x 6.5 mm or PH2
S 12/2 2 - 2.5 SD 1.2 x 6.5 mm or PH2
M 6 Power contacts
S 4/0 (Screw connection) 1.2 (1.5 mm²) / 2 (2.5 mm²) / 3 (4-16 mm²) SD 0.8 x 4 mm
S 4/2 1.2 (1.5 mm²) / 2 (2.5 mm²) / 3 (4-16 mm²) SD 0.8 x 4 mm
S 4/8 1.2 (1.5 mm²) / 2 (2.5 mm²) / 3 (4-16 mm²) SD 0.8 x 4 mm
M 7 x 0.75 Power contacts
S 4 1.1 – 1.7 SW 2
S 6/6 (+ PE) 6 – 8 SW 4
M 8 x 0.75 Power contacts
S 6/12 1.1 – 1.7 SW 2
S 8/0 (+ PE) 6 (10-16 mm²) - 7 (25 mm²) SW 4
M10 x 1 Power contacts
S 4/0 (Axial connection) 2 – 3 SW 3
Increasing the tightening torque does not improve the contact resistance. The stated torque settings offer optimal mechanical, thermal and electrical conditions. Exceeding the recommended values may even damage the conductor and
terminal.