Data Sheet
Datenblatt
Z terminal with tension spring connection
ZDU 4-2/2AN
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum January 14, 2014 6:02:49 PM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Length 61.5 mm
Width 6.1 mm
Height 45.5 mm
Height of lowest version
46 mm
Net weight 8.93 g
Temperatures
Operating temperature
Storage temperature
Continuous operating temp., min. -50 °C
Continuous operating temp., max. 120 °C
Rated data IECEx/ATEX
Certificate No. (ATEX) KEMA97ATEX4677U
ATEX certificate KEMA97ATEX4677U_d.pdf
ATEX certificate KEMA97ATEX4677U_e.pdf
Max. voltage (ATEX) 550 V
Current (ATEX) 28 A
Wire cross section max. (ATEX) 4 mm²
Voltage, cross-connection
CrossConnectionGuide.pdf
Operating temperature range For operating temperature
range see EC Design
Test Certificate / IEC Ex-
Certificate of Conformity
Marking EN 60079-7 Ex e II
Marking ATEX Directive 94/9/EC II 2 G D
Additional technical data
Explosion-tested version Yes
Number of similar terminals 1
Open sides right
Type of mounting
Snap-on
Version Tension-clamp connection,
for plug-in cross-connector,
One end without
connector
CSA ratings data
Certificate No. (CSA) 200039-1152892
Voltage size B (CSA) 600 V
Voltage size C (CSA) 600 V
Voltage size D (CSA) 600 V
Current size B (CSA) 35 A
Current size C (CSA) 35 A
Current size D (CSA) 5 A
Wire cross section max. (CSA)
10 AWG
Wire cross section min. (CSA) 26 AWG
Clampable wires (additional connection)
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, min. 0.5 mm²
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, max. 4 mm²