Data Sheet

Data sheet
MCZ SERIES
MCZ O 230VAC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date May 28, 2019 2:35:38 PM CEST
Catalogue status 23.05.2019 / We reserve the right to make technical changes. 3
Insulation coordination
Rated voltage 300 V
Pollution severity 2
Surge voltage category
III
Clearance and creepage distances for
control side - load side ≥ 5.5 mm
Dielectric strength for control side - load
side
1 kV
eff
/ 1 s
Dielectric strength to mounting rail
4 kV
eff
/ 1 Min.
Impulse withstand voltage 6 kV (1.2/50 µs)
Protection degree IP20
Further details of approvals / standards
Standards DIN EN 50178, UL508
Certificate No. (CSA)
154685-1198742
Certificate No. (cURus) E141197
Connection data
Wire connection method Tension-clamp connection
Stripping length, rated connection 8 mm
Clamping range, rated connection 1.5 mm²
Clamping range, min. 0.5 mm²
Clamping range, max.
1.5 mm²
Wire connection cross section AWG,
min. AWG 26
Wire connection cross section AWG,
max. AWG 16
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
1.5 mm²
Wire connection cross-section, finely
stranded, min. 0.5 mm²
Wire connection cross section, finely
stranded, max. 1.5 mm²
Wire cross-section, finely stranded, min.
(AWG) AWG 26
Wire cross-section, finely stranded, max.
(AWG)
AWG 16
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, min. 0.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, max. 1.5 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), min.
0.5 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), max. 1.5 mm²
Blade size
0.6 x 3.5 mm
Classifications
ETIM 3.0 EC001504
ETIM 4.0 EC001504
ETIM 5.0 EC001504
ETIM 6.0 EC001504
UNSPSC 30-21-18-01
eClass 5.1 27-27-09-90
eClass 6.2 27-27-09-90
eClass 7.1 27-37-16-04
eClass 8.1 27-37-16-04
eClass 9.0
27-37-16-04
eClass 9.1 27-37-16-04
Approvals
Approvals
ROHS Conform