Datasheet
D
D.22
Articles with coloured order number are kept permanently in stock at the central warehouse in Germany.
Delivery times see page X.2
Terminals, W-Series
PE terminals
Standard design
Identical external profile for the 2.5mm
2
- 10mm
2
terminals enables the use of common endplates
and partitions thus reducing stocking costs.
When using ATEX certified components in hazardous area ap-
plications the installation instructions and the rated data for
accessories in the technical appendix must be considered.
Width/Length/Height with TS35x7.5 mm
Max. current / max. cond. cross-section A/mm
2
Max. clamping range mm
2
IEC 60947-7-2 EEx e IITT II 2 G D
Technical data
Rated data
Rated cross-section mm
2
Rated voltage for adjacent terminal V
Rated impulse voltage for adjacent terminal kV
Short-time current resistant A
Pollution severity
Plug gauge IEC 60-947-1 / flammability class acc. UL94
Approvals
Clampable conductors (H05V/H07V)
Solid / stranded mm
2
Flexible / flexible w. wire end ferrule mm
2
Tightening torque range (clamping screw) Nm
Tightening torque range (fixing screw) Nm
Stripping length / blade size mm / -
2 clampable conductors of equal cross-section
Solid / stranded mm
2
Flexible / flexible w. wire end ferrule mm
2
Information
Ordering data
Version
green/yellow Wemid
Information
Accessories
End plate
dark beige Wemid
End bracket
dark beige / beige
Test adapter
For testing of wired terminal strips Standard version
With spigot
Screwdriver
w. cutting device “swifty set”
Standard version
Reducing sleeves
for conductors < 0.5 mm
2
/ < AWG 20
for conductors < 1.0 mm
2
/ < AWG 18
PEN-bridge
Insertable in distributor TN-S net between N- and PE-terminal
Marking systems (see large assortment in chapter M)
Tags
For detailed information on additional accessories and
usage instructions see chapter accessories.
WPE 16
IEC UL CSA EN 50019
16 AWG 14 …6 AWG 14…6 16
1000
8
1920 A (16mm
2
)
3
B7 / V-0
ar#u;~ix? KEMA 98ATEX1683 U
Rated connection Additional connection
1.5…16 / 1.5…25
1.5…25 / 1.5…16
2.0…4.0 (M 5)
1.2…2.4 (M 4)
16 / 5.5 x 1.0
1.5…6
1.5…6 / 1.5…6
TS 35x15 (steel, thickness 1.5mm) has to be used for cross-connections of
25 mm
2
(see chapter F).
D.22
16 mm
2
11.9 x 60 x 63
/ 25
1.5 ... 25
PE
Type Qty. Order No.
WPE 16 50 1010400000
Type Width [mm] Qty. Order No.
Width [mm]
WEW 35/1 12.2 50 1059000000
SD 1.0X5.5X150 10 9008350000
WQB-PEN 16 10 1060200000
WS 12/6,5 / DEK 5
Rail support for insulated installation of the mounting rail SH 2 order no.
0494920000 (Qty. 10)
IEC 60947-7-2 EEx e IIT
WPE 35
IEC UL CSA EN 50019
35 AWG 12 …2 AWG 12…2 35
800
8
4200 A (35mm
2
)
3
B8 / V-0
ar#u;~ix? KEMA 98ATEX1683 U
Rated connection Additional connection
2.5…16 / 2.5…50
2.5…35 / 2.5…35
2.5…5.0 (M 6)
1.2…2.4 (M 4)
18 / 6.5 x 1.2
2.5…10 / 16…16
2.5…16 / 2.5…16
TS 35x15 (steel, thickness 1.5mm) has to be used for 35 mm
2
. TS 35x15
(steel, thickness 2.3 mm) has to be used for 50 mm
2
. (see chapter F).
35 mm
2
16 x 60 x 63
/ 35
2.5 ... 35
PE
Type Qty. Order No.
WPE 35 25 1010500000
Conductor 50mm
2
, stranded, must be connected with 4Nm
Type Width [mm] Qty. Order No.
Width [mm]
WEW 35/1 12.2 50 1059000000
SD 1.2x6.5x150 10 9009010000
WQB-PEN 35 10 1060100000
WS 12/6,5 / DEK 5
Rail support for insulated installation of the mounting rail SH 2 order no.
0494920000 (Qty. 10)