User Manual

ManualsBrandsWeidmuller ManualsHardwareG118 Ultra SlimPak

Weidmuller Ltd.

10 Spy Court

Markham, ON L3R 5H6

Tel: (905)475-1507

Fax: (905)475-5855

Weidmuller Inc.

821 Southlake Blvd.

Richmond, VA 23236 U.S.A.

Tel: (804)794-2877

Fax: (804)794-0252

ISO 9001 Registered

Electronic Interface Modules

G118 Ultra SlimPak®

RTD Input, Field Configurable Limit Alarm

• field configurable via DIP switches for different input-

output combinations

• provides relay contact closure(s) at a preset

RTD/resistance input level

• field configurable input ranges for platinum, nickel and

copper RTDs

• setpoints programmable HI or LO and failsafe or non-

failsafe

• LED trip and input indicators

• flexible power supply accepts 9 to 30Vdc

• ASIC technology for high reliability

• CSA approved, UL recognized, CE marked

Summary of content (4 pages)

PAGE 1
Electronic Interface Modules G118 Ultra SlimPak® RTD Input, Field Configurable Limit Alarm • field configurable via DIP switches for different inputoutput combinations • provides relay contact closure(s) at a preset RTD/resistance input level • field configurable input ranges for platinum, nickel and copper RTDs • setpoints programmable HI or LO and failsafe or nonfailsafe • LED trip and input indicators • flexible power supply accepts 9 to 30Vdc • ASIC technology for high reliability • CSA approved, UL r
PAGE 2
+ Relay Contacts Power - Load Diode (optional) 47 ohm 1/2W 0.1uF Film Figure 2: DC Inductive Loads Power Relay Contacts Load MOV 47 ohm 1/2W 0.
PAGE 3
Not Used 3 Configuration Not Used Figure 4 G118 input range/function selection (SW1) Factory default settings Unless otherwise specified, the factory presets the Model G118 as follows: Input: Platinum (100M) Range: 0 to 250°C Output: Dual, SPDT Trip: A:HI, B:LO Failsafe: No Deadband: A, B: 1.0% The DC power input accepts any DC source between 9 and 30V; typically a 12V or 24Vdc source is used.
PAGE 4
RTD RTD Return TS32 RAIL RTD Input (+) TS35 RAIL RTD Input (+) RTD Return Rated data Input Range Maximum ratings Field device excitation Other input specification Other input specification Output Range Load Burnout level Zero / Span adjustment Protection Other output specification Other output specification Supply Range Consumption Other supply specification General Accuracy Linearity Temperature coefficient (drift) Transmission frequency Response time.