Manual

Weidmuller Ltd.

10 Spy Court

Markham, ON L3R 5H6

Tel: (905)475-1507

Fax: (905)475-5855

Weidmuller Ltd

821 Southlake Blvd.

Richmond, VA 23236 U.S.A.

Tel: (804)794-2877

Fax: (804)794-0252

ISO 9001 Registered

Electronic Interface Modules

G408-1000 Ultra SlimPak®

DC Input, Field Configurable Isolator,

Bipolar Output

• field configurable via DIP switches for different input-

output combinations

• eliminates ground loops and isolates to 1800Vdc

between input, output and power

• field configurable input ranges 10mV to 100V, 1mA to

100mA

• field configurable output ranges -10 to +10V

-5 to +5V

• ultra slim package 12.7mm

• 9 to 30Vdc powered

• CSA approved, UL recognized, CE marked

PAGE 1
Electronic Interface Modules G408-1000 Ultra SlimPak® DC Input, Field Configurable Isolator, Bipolar Output • field configurable via DIP switches for different inputoutput combinations • eliminates ground loops and isolates to 1800Vdc between input, output and power • field configurable input ranges 10mV to 100V, 1mA to 100mA • field configurable output ranges -10 to +10V -5 to +5V • ultra slim package 12.7mm • 9 to 30Vdc powered • CSA approved, UL recognized, CE marked Weidmuller Ltd.
PAGE 2
Table 1: G408-1000 input range selector - switch settings Table 3: Output range selector - switch settings Key: n ON Table 2: Input range and function settings Description The Ultra SlimPak G408-1000 is a DIN rail mount, DC input signal conditioner with 1800Vdc isolation between input, output and power. The field configurable input and output offers flexible, wide ranging capability for DC current and voltage signals.
PAGE 3
Configuration Calibration A major advantage of the G408-1000 is its wide ranging capability and ease of configuration. The G408 has 18 input range settings. Trim potentiometers allow 50% input zero and span adjustability within each of the 18 full scale input ranges. Unless otherwise specified, the factory presets the Model G408-1000 as follows: Input Range: 4-20mA Output Range: -10 to +10V The DC power input accepts any source between 9 and 30V; typically a 12V or 24VDC source is used.
PAGE 4
12.6 110.2 TS32 RAIL 105.2 TS35 RAIL 88.5 90.