Owner manual

ManualsBrandsWeidmuller ManualsHardwareG418 Ultra SlimPak

Weidmuller Ltd.

10 Spy Court

Markham, ON L3R 5H6

Tel: (905)475-1507

Fax: (905)475-5855

Weidmuller Inc.

821 Southlake Blvd.

Richmond, VA 23236 U.S.A.

Tel: (804)794-2877

Fax: (804)794-0252

ISO 9001 Registered

Electronic Interface Modules

G418 Ultra SlimPak®

RTD Input, Field Configurable Isolator

• field configurable via DIP switches for different input-

output combinations

• provides an isolated, linearised DC output

• output is linearized to temperature

• 3 port isolation to 1800Vdc between input, output and

power supply

• 5 field configurable output ranges 0-5V, 0-10V, 0-1mA

0-20mA, 4-20mA

• 9 to 30Vdc powered

• CSA approved, UL recognized, CE marked

Summary of content (4 pages)

PAGE 1
Electronic Interface Modules G418 Ultra SlimPak® RTD Input, Field Configurable Isolator • field configurable via DIP switches for different inputoutput combinations • provides an isolated, linearised DC output • output is linearized to temperature • 3 port isolation to 1800Vdc between input, output and power supply • 5 field configurable output ranges 0-5V, 0-10V, 0-1mA 0-20mA, 4-20mA • 9 to 30Vdc powered • CSA approved, UL recognized, CE marked Weidmuller Ltd.
PAGE 2
Table 3: Temperature input range switch settings (SW2 - 1 through 5) Table 1: G418 Platinum RTD temperature range Key: n ON Table 2: G418 Copper RTD temperature ranges Table 4: RTD input range switch settings (SW2 - 6 through 8) Description The Ultra SlimPak G418 is a DIN rail mount, RTD input signal conditioner with 1800Vdc isolation between input, output and power. The field configurable input and output offers flexible, wide ranging capability for Platinum and Copper RTDs.
PAGE 3
Table 5: Excitation type switch settings (SW3 - 1 through 8) Key: n ON Table 6: Output switch settings (SW1 - 1 through 8) Configuration Calibration A major advantage of the G418 is its wide ranging capabilities and ease of configuration. The G418 has 16 input temperature range settings, six RTD type settings and five output range settings. Trim potentiometers allow 50% input zero and span adjustability within each of the 16 full scale input ranges.
PAGE 4
TS32 RAIL TS35 RAIL Rated data Input Range Impedance RTD temperature sensor, 3 wire -200 to 600°C for Pt100/Pt500/Pt1000, -200 to 260°C for Cu10/Cu25/Cu100, DIP switch selectable Maximum ratings / type of protection Field device excitation Other input specification Other input specification Output Range Load Burnout level Zero / Span adjustment Protection Other output specification Other output specification Supply Range Consumption Other supply specification General Accuracy Temperature coefficient (dr