Weidmüller t D Bedienungsanleitung Operating instruction IE-GPRS-IO IE-GPRS-IO Made in Germany 8850060000
Operating Instruction The IE-GPRS-IO Alarm Modem is suitable for use in applications requiring signals to be activated via relay contacts, limit values to be monitored in analogue mode or where higher-level systems are to receive data per serial protocol. A virtual dedicated line can be configured via GPRS. Thus point-to-point, multipoint, multidrop topologies can be created extremely economically and with optimum functionality.
Technical Details Transmission modes Transmission medium Asynchronous, full/half duplex or simplex Dual Band GSM/GPRS Modem EGSM 900 / 1800 MHz Serial interface EIA RS-232-C/CCITT V.
Dimensional Drawing
Power Supply The IE-GPRS-IO can be supplied with either 10 to 36 V DC or 8 to 24 V AC. Power input is approx. 10 W. Electrical voltage Connection to the electrical supply system must be carried out by a qualified electrician. Power must be supplied via a power supply unit in accordance with DIN EN 60 742 (VDE 0551) The mains supply side must be fused. Use only the cables supplied to connect up the device. On the bottom rear end a connection to functional earth is recommended.
Connections/ Interfaces • 2 analogue inputs with ground connection • 2 digital outputs • 4 digital inputs with 2 ground connections • 4 digital inputs with 2 ground connections • 2 digital outputs • 2 analogue inputs with ground connection Connection for a GSM aerial GSM status LED Slot for SIM card RS-232 interface Status LEDs for analogue and digital inputs DIP switch for selecting functions Power and Status LED Connection for the power supply
Digital inputs and outputs Input Equivalent circuit for digital inputs: Input voltage 0 to 30 V DC Input voltage status 0 Input voltage status 1 0 to 6 V / 0 to 1.2 mA 10 to 30 V / 1.5 to 4.5 mA Output Operating voltage Output current 10 to 30 V DC Max. 400 mA Equivalent circuit for digital outputs: Take external measures to guarantee short-circuit and overload protection of the outputs.
Serial Interface Interface assignment COM 1 DCD Received Line Signal Data Carrier Detect RxD Received Data TxD Transmitted Data DTR Data Terminal Ready GND Signal Ground/Common Return DSR Data Set Ready RTS Request to Send CTS Clear to Send RING Ring Indicator 1 2 3 4 5 6 7 8 9 RS 232 DIP Switch - front side S1 ON OFF 1 2 3 4 Function DIP switch 1 2 3 4 Operates as signalling and GSM/GPRS system off off off off ON off off off On-site configuration.
DIP Switches - top and bottom S1 ON OFF 1 2 3 4 Function DIP switch 1 2 x x 3 off x x 4 off ON off x x ON off off off Analogue input for amperage to the ports AI4 and AI2 Analogue input for temperature sensor PT1000 to the ports AI4 and AI2 x x x Analogue input for voltage supply to the ports AI3 and AI1 x x Analogue input for amperage to the ports AI3 and AI1 off ON Analogue input for voltage supply to the ports AI4 and AI2 x off ON Analogue signal conditioning to voltage Anal
Mounting The IE-GRPS-IO is for wall mounting and DIN-Rail mounting. DIN-Rail mounting Taking off the DIN-Rail Wall mounting Remove the infolded brackets Fix the backets out-foulded Notes for GSM-Modem Disconnect the device from the power supply before inserting the card. To insert the card, use a sharp instrument to undo the housing lid then place the SIM card into the tray with the chip facing upwards Notes on GSM modem Standard-IP-Adress 192.168.1.
5 YEAR WARRANTY Weidmüller gives a 2 year warranty on all its actively processing Industrial Ethernet products and all actively processing I/O-Interface products in accordance with the warranty terms as described in the general conditions of sale of the Weidmüller company which has sold the products to you.
