Information Leaflet Industrial Ethernet 10/100 MBit/s ECO-Switch IE-SW5-ECO 8808230000 PWR Weidmüller t Version 1.
No Warranty. The technical documentation is supplied without any warranty of fitness. Weidmueller does not warrant for their accuracy. The documentation may contain technical and typographical inaccuracies. Weidmueller reserves the right to change it without notice. All rights reserved. Reproduction, copying or redistribution for commercial purpose of any Weidmueller material or design elements is strictly prohibited. Copyright © 2009 Weidmüller t 1 Instructions 1.
1.4 Recycling in accordance with WEEE B2B disposal Dear Weidmueller Customer, purchasing our product gives you the opportunity to return the device to Weidmueller at the end of its service life. The EU Directive 2002/ 96 EC (WEEE) regulates the return and recycling of waste electrical and electronics equipment. In the Business to Business sector (B2B), manufacturers of electrical equipment are obliged as of 13/08/05 to take back and recycle free of charge electrical equipment sold after that date.
2.1 Intended use The IE-SW5-ECO is designed for the application in the industrial environment (IP20). The product is equipped with Ethernet interfaces and serves exclusively for the connecting of components inside of network. The data communication between these network participants is enable by the connection of network components. 2.2 Dimensions 2.
2.4 LED LED: Power Link / Activity Duplex green valid power supply red invalid power supply green 100 Mbit/s Link green flashes 100 Mbit/s Link traffic yellow 10 Mbit/s Link gelb flashes 10 Mbit/s Link traffic green Full-duplex off Half-duplex 2.5 Power supply Caution Insecure outputs. Operations on the IE-SW5-ECO only realise by qualified employees. Use a power supply unit according to DIN EN 60742 (VDE 0551). Secure all electrical outputs.
- There must be 2” (ca. 5 cm) free space on both sides (top and bottom) and also on the sidewalls for ventilation to the next device. - To ensure proper ventilation through the device the unit shall be mounted on a DIN-Rail which is oriented horizontal on the vertical rear wall of the control cabinet.
Ambient Conditions Operation temperature 0°C ... +60°C Storage temperature -40°C ... +85°C Mounting DIN-rail TS-35 according EN 50022 Functional Compliance ANSI/IEEE 802.3 Data rate 10 /100 Mbit/s Signalling 10 Base-T / 100 Base-TX Connectors shielded RJ-45 Segment lenght (max.
6 Warranty of this product Weidmueller gives a 2 year warranty on all its actively processing Industrial Ethernet products and all actively processing I/O-Interface products in accordance with the warranty terms as described in the general conditions of sale of the Weidmueller company which has sold the products to you.
