Beipackinformation 1 Operating Instructions 9 Notice d’utilisation 15 Analogsignaltrenner WAVEANALOG DC/DC aus der WAVESERIES RT Nr.
Analogue Signal Isolators WAVESERIES WAVEANALOGUE DC/DC Model Order Number Screw terminal connection WAS5 CCC 0(4)…20 mA/0(4)…20 mA WAS5 CCC 0…20 mA/4…20 mA WAS5 CVC 0…20 mA/0…10 V WAS5 CCC 4…20 mA/0…20 mA WAS5 CVC 4…20 mA/0…10 V WAS5 VCC 0…10 V/0…20 mA WAS5 VCC 0…10 V/4…20 mA WAS5 VVC 0…10 V/0…10 V 8540180000 8540250000 8540270000 8540200000 8540230000 8540310000 8540290000 8540330000 Tension clamp connection WAZ5 CCC 0(4)…20 mA/0(4)…20 mA WAZ5 CCC 0…20 mA/4…20 mA WAZ5 CVC 0…20 mA/0…10 V WAZ5 CCC 4…20
1. General instructions Warning! Analouge signal isolators from the WAVEANALOGUE range should only be installed by qualified staff. Auxiliary power should only be supplied after the device has been installed by qualified staff. National standards and regulations (e. g., DIN VDE 0100 in Germany) must be observed when selecting and installing supply conductors. Protective measures must be taken against electrostatic discharges (ESD) when installing and setting WAVEANALOGUE devices. 2.
. Mounting The analogue signal isolators are mounted on standard TS 35 rails. 5. Electrical connection Terminal assignments Wire cross-section max. 2.5 mm2 max. 2,5 mm2 Anschlußquerschnitt Multi-wire conncection max. 1 mm2 max. 1 mm2 Mehrleiteranschluß (zwei Leiter gleichen Querschnitts) (two wires with same cross-section) 10 11 12 7 8 9 V. 0 We i dm ü l le r 12 nc 0V 8 7 9 24V nc OUT 8540180000 0V nc 5 1 2 INPUT 6 nc 24V cc IN 0...20mA PS 06 cc 0...
6.
7. Accessories (cross-connection) Designation ZQV 2,5 N/2 yellow ZQV 2,5 N/2 red ZQV 2,5 N/2 blue ZQV 2,5 N/2 black Cat. No. 169380 171790 171799 171808 Connection markers Designation WS 10/5 Multicard for plotter marking WS 10/5 Neutral Cat. No. 163501 106086 8.
Weidmüller Interface GmbH & Co. Postfach 30 30 D-32720 Detmold Tel.
