User Manual

WI-I/O 9-L-x Installation Guide
WI-I/O 9-L-x v1.6 Page 29 of 39

The WI-I/O 9-L-T module lets you configure the digital inputs as pulse inputs with the
following characteristics:
Characteristic Value
Maximum rate 10 Hz
Minimum off time 20 mSec
Minimum on time 20 mSec
Using this mode, you can map the pulse count to a remote output by re-generating as a
Pulse Output on WI-I/O 9-1or Digital Output on a WI-I/O 9-3 unit.
Note
You should connect the pulse input in the same way as a digital input.
The following diagrams illustrate different connection methods:
Connection
method
Example
Passive
transistor
Active pulse
device