Manual

WI-I/O 9-x Wireless Module User Manual v2.16
WI-I/O-EX-1-S-x Serial Module
Page 2
Thank you for your selection of the WI-I/O-9-x WI-I/O-EX-1-S-x module for your I/O needs. We trust it
will give you many years of valuable service.
ATTENTION!
Incorrect termination of supply wires may
cause internal damage and will void warranty.
To ensure this product enjoys a long life,
double check ALL your connections with
the user’s manual
before turning the power on.
Caution! For continued protection against risk of fire, replace the module fuse F1 only with
the same type and rating.
CAUTION:
To comply with FCC RF Exposure requirements in section 1.1310 of the FCC Rules, antennas used
with this device must be installed to provide a separation distance of at least 33 cm from all persons
to satisfy RF exposure compliance.
DO NOT:
• operate the transmitter when someone is within 33 cm of the antenna
• operate the transmitter unless all RF connectors are secure and any open connectors are properly
terminated.
• operate the equipment near electrical blasting caps or in an explosive atmosphere
All equipment must be properly grounded for safe operations. All equipment should be serviced only
by a qualified technician.