Manual

WI-I/O 9-x Wireless Module User Manual v2.16
WI-I/O-EX-1-S-x Serial Module
Page 62
Analog Input Setpoints WI-I/O 9-1_WI-I/O-EX-1-
S-1 AI 1 only
WI-I/O 9-2_WI-I/O-EX-1-
S-2 AI 1-4
Configurable high & low set-points, allowing
set/reset of remote digital outputs
Analog Outputs current sink to common
WI-I/O 9-1_WI-I/O-EX-1-
S-1
Two 4-20mA
WI-I/O 9-3_WI-I/O-EX-1-
S-3
Eight 0-20mA
max loop voltage 27V,
Resolution 15 bit, Accuracy 0.1%
Resolution 12 bit, Accuracy 0.1%
System Parameters
Network Configurations Communications via radio
or RS485 or network of
both
Up to 95 radio units with up to 32 serial units
off each radio unit
User Configuration Any input to any output in
system
RS232 PC or laptop
Diagnostics
On board diagnostics Automatic check on start-
up
Via RS232 terminal or
laptop
Input status
Output test
Incoming radio signal level
Simple radio path testing