Manual

WI-I/O 9-x_WI-I/O-EX-1-S-x 2.16 Page 65
functions. Use of the diagnostics menu does not affect module configuration.
The diagnostics functions can be accessed from the E Series Config software - the same software
package used to configure the modules. Connect the laptop or PC to the module using a configuration
RS232 cable.
Either open the archived project containing the module, or start a New Project and select “Load a New
Unit” - select the correct type of module. After the unit has loaded, select the Diagnostics box.
A “Terminal” screen will appear. Select the “Terminal” box.