Manual

WI-I/O 9-x Wireless Module User Manual v2.16
WI-I/O-EX-1-S-x Serial Module
Page 78
Tank Station Configuration
The WI-I/O 9-2 module has the following configuration :-
Note the following points in the configuration:
• #1 is a repeater for communications between
#2 and #94
• The pulse rate scaling for PIN1 has been set
to 5 Hz to match the maximum flow rate of
the flow meter. Note that PIN1 has not been
configured for "divide by 10" (for 1000 Hz
pulse signals).
• AIN1 (the level transducer) is mapped to
AO1 at the WI-I/O 9-3. The analog debounce
has been set to 2 sec. This is because of