Instruction Manual

WI-MOD-9-D Radio Modem User Manual v1.9

WI-MOD-9-D Manual v 1.9 Page 10

to set destination addresses would be a central computer polling data loggers for periodic

information.

1.4 Repeater Units

A WI-MOD-9-D unit may be used as a repeater to re-transmit radio messages. The purpose of a

repeater unit is to extend radio range.

In transparent mode, there can be an unlimited number of repeaters, however with some

conditions (refer to Section 3.5). The repeater in transparent mode will repeat every

transmission it receives.

In controlled mode, up to five repeaters may be configured for any transmission path. The

repeaters are configured by address.

PLC

MOD

WI-MOD

RS485

PLC

WI-MOD

PLC

REPEATER

WI-MOD