User's Manual

the device is in the normal state.
Red led will blink at an interval of 0.5 second when the signal is
sent into dongle.and then blue led will blink after short press
multifunction button.
Blue & red leds will blink alternatively on and off when dongle is
in the pairing.leds blink faster in the short press state than long
press.
If the dongle is connected with some device ,unplug and plug
Blue& red will blink alternatively(0.1s).otherwise they will blink
alternatively(0.5s).
4.5 Support skype:When talk with skype,it need the following
configuration.
Open Skype ->Tools ->Options….
Open ‘ Hotkeys’ in the option, and set the status of ‘ Answer call’ and
‘Reject/Hang up call’ to ‘Enable’. And then save the setting.