Instruction manual
Part number 550-100-116/0714
64
SlimFit
™
COMMERCIAL CONDENSING GAS-FIRED WATER BOILER
— Boiler Manual
&IGURE Analog I/O Status page
Diagnostics Tests
(HOME PAGE DIAGNOSTICS DIAGNOSTICS TESTS)
1. Pressing the DIAGNOSTICS TESTS buon launches the diag-
nostic tests (Figure72.).
2. is screen enables the user to perform the following tests:
a. Modulation Test: enables the user to verify that the burner is
ring at the correct rate. (See Figure72.)
b. Pump Test: enables the user to verify that the correct pump
is on or o. e Start Test buon will test all pumps; press-
ing an individual pump tests that pump only. (See Figure73,
page64.)
c. Burner Switch: this buon turns the burner on or o.
d. Start Test: runs the test for 5 minutes.
&IGURE
Modulation test
Use the modulation test screen to manually control the
boiler ring rate during startup combustion verica-
tion.
&IGURE Pump test.
Trend Analysis
(HOME PAGE
DETAILS ANALYSIS)
1. Use the Sola control’s trend analysis functions to see graphical
displays of operating data vs time (see Figure75).
2. To start a trend analysis:
a. Press the ANALYSIS buon on the Details screen. Select the
operating data to be monitored.
b. e Trend Analysis screen will appear (Figure75).
c. Up to 10 variables can be trended at the same time.
d. To add an operating variable to the list, use the Trend Variable
drop-down menu at the top. Select an item. en press the
ADD buon (boom le).
e. To remove items from the list, press DELETE for a single
highlighted item or CLEAR ALL to remove all items.
f. Only two dierent measurement units can be trended (such
as degrees and RPM’s, for example). e control won’t accept
another item if it requires a dierent unit.
g. When ready to view the graph, press the START TRENDING
buon (upper right). To stop a trend run, press the STOP
TRENDING buon (right center).
h. To see the graph, press the VIEW buon to go to the graph
screen.
i. To see a saved trend analysis, press the VIEW SNAPSHOT
buon. From the next screen, select the saved analysis desired.
&IGURE
Trend analysis menu
Sola control interface and menus (continued)