SDS

SAFETY DATA SHEET
Confirms to OSHA Hazard Communication Standard (CFR 29 1910.1200) HazCom 2012
Product:
Stainless Steel Cleaner and Polish- 02, 02WMA, 49, 102, 494
Revision Date: 11-Feb-2019
Document No.: 130529-5 Page 2 of 5
Release Date: 1/10/2014
Ingestion: If swallowed, do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Get medical advice/attention if you feel unwell.
Skin: If irritation occurs, flush skin with plenty of water. Get medical attention if irritation persists.
Most Important Symptoms and Effects (Acute and Delayed)
Inhalation: May cause respiratory tract irritation.
Eye Contact: May cause eye irritation. Symptoms may include discomfort or pain, excess blinking and tear production,
with possible redness and swelling.
Ingestion: May be harmful if swallowed. May cause stomach distress, nausea or vomiting.
Skin: May cause skin irritation. Symptoms may include redness, drying, defatting and cracking of the skin.
Indication of any Immediate Medical Attention and Special Treatment Needed
Note to Physician: Treat symptomatically.
SECTION 5 – FIRE FIGHTING MEASURES
Extinguishing Media
Suitable: Treat for surrounding material.
Unsuitable: None known.
Specific Hazards Arising from Chemical
Flammable aerosol. Products of combustion include, and are not limited to: oxides of carbon. Heat may build pressure,
rupturing closed containers, spreading fire and increasing risk of burns and injuries.
Protective Equipment and Precautions for Firefighters
Cool closed containers exposed to fire with water spray. Keep upwind of fire. Wear full fire-fighting turn-out gear (full
Bunker gear) and respiratory protection (SCBA).
SECTION 6 – ACCIDENTAL RELEASE MEASURES
Personal Precautions, Protective Equipment, and Emergency Procedures
Personal Precautions: Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to
unnecessary and unprotected personnel.
Environmental Precautions: See Section 12 for ecological information.
Methods and Material for Containment and Cleaning Up
Eliminated sources of ignition. Contain and/or absorb spill with inert material (e.g. sand, vermiculite), then place in a suitable
container. Do not flush to sewer or allow to enter waterways. Use appropriate Personal Protective Equipment (PPE).
Scoop up material and place in a disposal container. Provide ventilation.
SECTION 7 – HANDLING AND STORAGE
Precautions for Safe Handling
Handling: Keep away from sources of ignition- No smoking. Avoid contact with skin and eyes. Avoid breathing
dust/fume/gas/mist/vapors/spray. Do not swallow. When using do not eat, drink or smoke. Do not spray on an open flame
or other ignition source. Pressurized container: Do not pierce or burn, even after use.
General Hygiene Advice: Launder contaminated clothing before use. Wash hands before eating, drinking, or smoking.
Conditions for Safe Storage, Including any Incompatibilities
Storage Conditions: Proper grounding procedures to avoid static electricity should be followed. Keep out of the reach of
children. Do not expose to temperatures exceeding 50ºC/122ºF. Store away from direct sunlight or other heat sources.
Store in a well-ventilated place.
Incompatible Materials: Strong oxidizing agents.
SECTION 8 – EXPOSURE CONTROLS/PERSONAL PROTECTION
Control Parameters
Exposure Guidelines: