Specification Sheet

t 604.419.4300 toll free 1.800.501.9471 | f 604.419.4385 toll free fax [phone] | www.weiserlock.com
Door Prep Deadbolt: Cross Bore 2-1/8" or 1-1/2"
Edge Bore 1"
Latch Face 1" x 2-1/4"
Handle: Cross Bore 2-1/8". Edge Bore 1"
Latch Face 1" x 2-1/4"
Backset Deadbolt: Adjustable to 2-3/8" or 2-3/4"
Handle: Adjustable to 2-3/8" or 2-3/4"
Door 1-3/4" doors standard. 2-1/4" doors optional
Thickness Not designed for use on 1-3/8" doors.
Cylinder SmartKey or KW or WS 5pin
Faceplate 1" x 2-1/4"
Specify round corner or square corner or drive-in
Strikes Deadbolt: 1-1/8" x 2 - 3/4"
Specify round corner or square corner
Handle: 2-1/4" full lip
Specify round corner or square corner
Other options available
Bolt Deadbolt: 1” steel
Handle: 1/2" throw. Nickel plated
Door Handing Reversible for right or left-hand doors
ANSI/BHMA A156.5 Grade 2 (for deadbolt)
ADA N/A
UL N/A
Door Prep Cross Bore 2-1/8" Edge Bore 1"
Latch Face 1" x 2-1/4"
Backset Adjustable to 2-3/8" or 2-3/4"
UL 2-3/4” standard 2-3/8” optional
Door 1-3/8" – 1-3/4" doors standard
Thickness 2-1/4" doors optional on GLA101 and GLA535 models
Cylinder SmartKey or KW or WS 5pin
Faceplate 1" x 2-1/4"
Specify round corner, square corner or drive-in
Strikes 2-1/4" full lip
Specificy round corner or square corner
Other options available
Bolt 1/2” throw nickel plated
Door Handing Specify handing only with Inactive levers
ANSI/BHMA A156.2 Grade 2
ADA Functions GLA 101 and GLA 12 satisfy section ...
4.13.9. ADA requirement
UL Meets 3 hour fire rating for all UL functions when
fronted latches used.
Meets 20 minute with drive-in latch.
Door Prep Crossbore 2-1/8" or 1-1/2"
Edge Bore 1"
Latch Face 1" x 2-1/4"
Backset Adjustable to 2-3/8" or 2-3/4"
Door 1-3/8” - 1-3/4” Standard
Thickness 2-1/4” Optional
Cylinder SmartKey or KW or WS 5pin
Faceplate 1" x 2-1/4"
Specify round corner, square corner or drive-in
Strikes 1-1/8" x 2-3/4"
Specify round corner or square corner
Bolt 1” throw Steel
Door Handing Reversible for right or left-hand doors
ANSI/BHMA A156.5 Grade 2
ADA Interior turn piece meets 4.13.9 ADA requirements
UL Meets 3 hour fire rating for all UL functions when
fronted latches used.
Meets 20 minute with drive-in latch.
SPECIFICATIONS
HANDLESETS
LEVERS
Door Prep Cross Bore: 2-1/8"
Edge Bore: 1"
Latch Face: 1"x 2-1/4"
Backset Adjustable to 2-3/8” or 2-3/4”
UL 2-3/4” standard 2-3/8” optional
Door 1 - 3/8” - 1-3/4" doors standard
Thickness 2-1/4" doors optional
2-1/4" doors optional on GA 101 and GLA 551
models only
Cylinder SmartKey or KW or WS 5pin
Faceplate 1" x 2-1/4"
Specify round corner, square corner or drive-in
Strikes 2-1/4" full lip
Specify round corner or square corner
Other options available
Bolt 1/2” throw nickel plated
Door Handing Reversible for right- or left-hand doors.
ANSI/BHMA A156.2 Grade 2
ADA N/A
UL Meets 3 hour fire rating for all UL functions when
fronted latches used.
Meets 20 minute with drive-in latch.
K NOBS
DEADBOLTS