Technical data

OWNERS MANUAL FOR WEISS DAC202 D/A CONVERTER
Page 18 Date: 03/10
- The Firewire input is routed to: XLR out, RCA out, APB.
- The Firewire output (going to the computer for recording) is
fed from the source specified as the sync source:
XLR selected as sync source: XLR signal goes to Firewire.
RCA selected as sync source: RCA signal goes to Firewire.
Toslink selected as sync source: Toslink signal goes to Firewire.
Internal or WC BNC or 1394 bus selected as sync source: The
Firewire output is muted.
- The DAC chip is fed from the source selected in the Insert
mode menu, i.e. from either the XLR or RCA or Toslink input.
Mode: Firewire input / dual wire / no insert
- The Firewire input is routed to: DAC chip, XLR out (left
channel), RCA out (right channel), APB.
- The Firewire output (going to the computer for recording) is
fed from the source specified as the sync source:
XLR/RCA selected as sync source: XLR is the left channel signal
going to Firewire and RCA is the right channel signal going to
Firewire.
Toslink selected as sync source: Not supported.
Internal or WC BNC or 1394 bus selected as sync source: The
Firewire output is muted.
Mode: Firewire input / dual wire / insert active
- The Firewire input is routed to: XLR out (left channel), RCA
out (right channel), APB.
- The Firewire output (going to the computer for recording) is
fed from the source specified as the sync source:
XLR/RCA selected as sync source: XLR is the left channel signal
going to Firewire and RCA is the right channel signal going to
Firewire.
Toslink selected as sync source: Not supported.
Internal or WC BNC or 1394 bus selected as sync source: The
Firewire output is muted.
- The DAC chip is fed from: XLR input (left channel) and RCA
input (right channel).
Mode: AES(XLR) input / single wire / no insert
- The XLR input is routed to: DAC chip, XLR out, RCA out,
Firewire out, APB.
- The Firewire input, RCA input and Toslink input are not routed
anywhere.
- The sync source can be specified as the XLR input, the RCA
input, the Toslink input the WC BNC input, the 1394 bus or the
internal sync generator.
Mode: AES(XLR) input / single wire / insert active
- The XLR input is routed to: RCA out, APB.
- The DAC chip, Firewire output and XLR output are fed from the
RCA input or Toslink input as selected in the insert menu.
- The Firewire input is not routed anywhere.
- The sync source can be specified as the XLR input, the RCA