Technical data
OWNERS MANUAL FOR WEISS DAC202 D/A CONVERTER
Page
19
Date: 03/10
input, the Toslink input the WC BNC input, the 1394 bus or the
internal sync generator.
Mode: AES(XLR) input / dual wire / no insert
- The XLR input (left channel) and the RCA input (right channel)
are routed to: DAC chip, XLR out (left channel) RCA out (right
channel), Firewire out, APB.
- The Firewire input and Toslink inputs are not routed anywhere.
- The sync source can be specified as the XLR input, the RCA
input, the Toslink input the WC BNC input, the 1394 bus or the
internal sync generator.
Mode: AES(XLR) input / dual wire / insert active
This mode is not supported.
Mode: S/PDIF(RCA) input / single wire / no insert
- The RCA input is routed to: DAC chip, XLR out, RCA out,
Firewire out, APB.
- The Firewire input, XLR input and Toslink input are not routed
anywhere.
- The sync source can be specified as the XLR input, the RCA
input, the Toslink input the WC BNC input, the 1394 bus or the
internal sync generator.
Mode: S/PDIF(RCA) input / single wire / insert active
- The RCA input is routed to: XLR out, APB.
- The DAC chip, Firewire output and RCA output are fed from
the XLR input or Toslink input as selected in the insert menu.
- The Firewire input is not routed anywhere.
- The sync source can be specified as the XLR input, the RCA
input, the Toslink input the WC BNC input, the 1394 bus or the
internal sync generator.
Mode: S/PDIF(RCA) / dual wire / no insert
- The XLR input (left channel) and the RCA input (right channel)
are routed to: DAC chip, XLR out (left channel) RCA out (right
channel), Firewire out, APB.
- The Firewire input and Toslink inputs are not routed anywhere.
- The sync source can be specified as the XLR input, the RCA
input, the Toslink input the WC BNC input, the 1394 bus or the
internal sync generator.
Mode: S/PDIF(RCA) input / dual wire / insert active
This mode is not supported.
Mode: S/PDIF(TOS) input / single wire / no insert
- The TOS input is routed to: DAC chip, XLR out, RCA out,
Firewire out, APB.