Technical data

OWNERS MANUAL FOR WEISS DAC202 D/A CONVERTER
Page 2 Date: 03/10
INTRODUCTION
Dear customer
Congratulations on your purchase of the DAC202 D/A Converter and
welcome to the family of Weiss equipment owners!
The DAC202 is the result of an intensive research and development process.
Research was conducted both in analog and digital circuit design, as well as
in signal processing algorithm specification.
On the following pages I will introduce you to our views on high quality
audio processing. These include fundamental digital and analog audio
concepts and the DAC202 converter.
I wish you a long-lasting relationship with your DAC202.
Yours sincerely,
Daniel Weiss
President, Weiss Engineering Ltd.
TABLE OF CONTENTS
3 A short history of Weiss Engineering
3 Our mission and product philosophy
4 Advanced digital and analog audio concepts
explained
4 Jitter Suppression, Clocking
5 Upsampling, Oversampling and Sampling Rate
Conversion in General
7 Reconstruction Filters
7 Analog Output Stages
7 Dithering
9 The DAC202 D/A Converter
9 Features in alphabetical order
12 Operation, Installation
21 Software Installation
21 Software Setup
23 Technical Data
26 Contact
Author: Daniel Weiss, Weiss Engineering LTD.
Weiss Engineering LTD. reserves the right to make changes to product specification or documentation without prior notice.
Updated manuals and datasheets are available at our website for downloading. Weiss Engineering LTD. makes no warranty,
representation or guarantee regarding the suitability of its products for any particular purpose, nor does part of this manual, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages.
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical including photocopying, scanning or any information storage or retrieval system without the express prior written
consent of the publisher.
© Copyright Weiss Engineering LTD., 2010.