Technical data

OWNERS MANUAL FOR WEISS DAC202 D/A CONVERTER
Page 20 Date: 03/10
- The Firewire input, RCA input and XLR input are not routed
anywhere.
- The sync source can be specified as the XLR input, the RCA
input, the Toslink input the WC BNC input, the 1394 bus or the
internal sync generator.
Mode: S/PDIF(TOS) input / single wire / insert active
- The TOS input is routed to: APB plus either RCA or XLR out
depending on the insert routing selected, i.e. the insert can go
via the RCA or the XLR connectors.
- The DAC chip, Firewire output and RCA (or XLR) output are
fed from the XLR (or RCA) input as selected in the insert menu.
- The Firewire input is not routed anywhere.
- The sync source can be specified as the XLR input, the RCA
input, the Toslink input the WC BNC input, the 1394 bus or the
internal sync generator.
Mode: S/PDIF(TOS) / dual wire / no insert
- The XLR input (left channel) and the TOS input (right channel)
are routed to: DAC chip, XLR out (left channel) RCA out (right
channel), Firewire out, APB.
- The Firewire input and RCA inputs are not routed anywhere.
- The sync source can be specified as the XLR input, the RCA
input, the Toslink input the WC BNC input, the 1394 bus or the
internal sync generator.
Mode: S/PDIF(RCA) input / dual wire / insert active
This mode is not supported.