User Manual

34
Quick Set Up Guide
Shenzhen Weistek Co., Ltd
Add.: RM2301, Shenzhen Overseas Chinese High-Tech Venture Park, Shenzhen, P. R. China
Website: www.weistek.net
4.1.8 Move the building plate and the extruder head to place the
nozzle in the center of the building plate, and keep the building plate
still. Move the extruder from left to right, and adjust Screw C (the one
with spring) beneath, to ensure the same distance (0.3mm). Click
[Accurately measure] to adjust the Z-height when the distance is not
0.3mm. (Pic 4.1-09)
（Pic 4.1-09）
4.1.9 After adjusting the building plate, click [Meter Z], and the
building plate will go down again and stop when touching the Limit
Switch.
Click [Size setting], new data will be saved on the program.
Screw C