Datasheet

Version 001
19
IdeaWerk Plus User Manual
4.3.10.2 The imported model will be automatically placed in the center of
the platform. You can move the slider in “X/Y/Z” with the mouse to
change its position, and the model will move on the platform according
to the distance the slider moves.
4.3.10.3 You can also directly input the moving distance in the slider
dialog of “X/Y/Z”. Notice: if the moving distance is beyond the maximum
frame, the model will move to the position of the maximum frame, as
shown below.
4.3.10.4 After the model is rotated, scaled or moved, if you want to move
the model to the center of the platform, click “Land” and “ center” or click
“Reset” to return to the original state of model printing.
4.3.10.5 If you want to import multiple models or move one model, select
the corresponding model with the left mouse button and then move it.
Notice: each time, only one model can be selected, multiple models
cannot be selected or automatically arrange after import.
4.3.11 Model rotation
4.3.11.1 Select the model and click the left menu icon of model rotation.
Notice: the left menu icon of model rotation will not appear before
the model is selected.
4.3.11.2 To rotate the model along the axial direction, move the slider on
the corresponding axis with the mouse or directly input the rotation angle
in the dialog, and click enter. The model’s rotation angle will be displayed
in the subsequent dialog. To return to the original state, click “Reset” to
restore the original angle of the model.
4.3.11.3 To operate one of several models, first select the model with the
left mouse button, and then the model can be rotated, as shown below.
Notice: you can only rotate one model each time.
4.3.12 Model zoom