Datasheet

Version 001
21
IdeaWerk Plus User Manual
4.4 Print from PC
4.4.1 Software features are described above, this section takes the cube
model for example to introduce the whole process of online printing.
After connecting software to the IdeaWerk Plus, import the cube model,
as shown below.
4.4.2 Select the model with the left mouse button, click the left menu
button to move the model to the center of the platform, and you can click
“center”, as shown below.
4.4.3 Click the left menu button to generate GCODE (PLA material used
for printing), set the nozzle temperature at 220 °C and the platform
temperature at 30 °C, and click “Setting”, as shown below.
4.4.4 Other parameters are default settings. Click “Generate GCODE”. After
GCODE is generated, click “OK” to close the prompt box popping out.
4.4.5 Click the button “Start Print”, and the IdeaWerk Plus begins to work,
as shown below.
4.4.6 After model printing, the object is as shown below. Follow steps in
3.2.8-9 to remove the model.
4.5 Print from PC notes
4.5.1 Turn off the computer’s sleep mode before printing, otherwise the
printing process will be interrupted.
4.5.2 Before removal of the model, first remove the panel of the build plate.
Direct removal of the model may bend the build plate, resulting in change in
height of the nozzle and the build plate and affecting the printing next time.