Installation and operating instructions for oven
17
GB
Installing the sauna oven
앬 Affix the feet on the rear wall of the oven using
the screws supplied (4 screws M5 x 12).
앬 Fasten the bottom panel to the inner sheath with
4 self-tapping screws 3.9 x 9.5.
앬 Thread the mains cable into the terminal box
through the hole provided for it.
앬 After making the electrical connection of the
mains cable, close the cover on the terminal box
again (with the spacer on the outside).
앬 Position the sauna oven in front of the air intake
opening. Secure the wall bracket to the wall of
the booth using the wood screws supplied.
앬 Insert the stone grate (see description entitled
„Placing the sauna stones on the stone grate“,
section entitled „Cleaning and care“, page 20).
Screws
4 x M5 x 12
Sauna heater
foot
Terminal box
2 x Wall bracket
4 x Securing
screws
(wood
screws)
5 x 35
Bottom panel
Screws
4 x M5 x 12
Self-tapping screws
3.9 x 9.5
Anleitung SHG Classic:Anleitung SHG 3,3-9,0KW_93s 11.12.2007 10:33 Uhr Seite 17